Battery Charger 400VAC to 220VDC 10A/20A/30A/40A

1, High efficiency, 95%-96% 2, Output overvoltage protection 3, Output current limiting protect 4, LED digital screen

Battery Charger 400VAC to 220VDC 10A/20A/30A/40A

Main characteristic of the module

lModularization design, realize N+1 backup;

lThe friendly man-machine interface. Large screen to show, realize man-machine dialogue operate really.

lRS-485 inrerface, realize “4 remote” function with monitor machine.

lHigh efficiency, Nearly 95%-96%;

lLightly, 230V/10A natural cooling module only 9kg;

lLittle volume, 230V/10A natural cooling module dimension only 325mm×230mm×130mm;

lAfter the full bridge rectifying circuit rectifies 3-phase AC to DC, then adjusted by reactive PFC, power factor>0.94;

lFunction against reverse pour: each module has been added diode against reverse pour at output terminal.

lLED digital screen, digital calibrate, stable current ,fault alarm

lOutput overvoltage protection

To prevent the disastrous accident caused by outputting overvoltage to electric consumers, there is overvoltage protection circuit in the module. After output overvoltage occurs, the module locks up automatically, the relative module fault indication light is on, the faulty module quits work automatically and doesn’t affect the normal operation of the entire system. The overvoltage protection point is set when ex-factory, 320V±5% is set for rated output 220V machine type, 160V±5% is set for rated output 110V machine type.

lOutput current limiting protect

The output current cannot increase infinitely. The maximum value of the output current of each module is limited to the rated output current 105%, in this range, the output current value of the module is continuously adjustable. If the load output of the module, the module will play down the output voltage.

lOutput short-circuit protection

When output short circuit, the module draws the output voltage to 0 immediately, limit the short circuit current below 15%limit current point to protect the module. The module will not be damaged under short circuit state for a long time, and can go back to work automatically after debugging.

module project			230D10ZZ-220AC	230D05ZZ-3	230D20ZZ-3		230D20NZ-3	230D30NZ-3	230D40NZ-3
rated output current(A)			10	5	20		20	30	40
power(KW)			3	1.5	6		6	9	12
weight(kg)			9	5.2	16		10.5	19	19
cooling method			natural cooling				fan cooling
heat sink temperature rise			≤30°C				≤20°C
rang of input AC(VAC)		min	187			304
		Typical value	220			380
		max	253			456
rang of the output voltage(VDC)		min	190
		Typical value	220
		max	300
stable voltage accuracy:			±0.5%
stable current accuracy:			±1%
PFC			≥0.93
Efficiency			≥95%
noise(dB)			50
Storage temperature(°C)	min		-40
	Typical value		25
	max		60
working temperature(°C)	min		-10
	Typical value		25
	max		40
And machine uneven fluidity			≤±3%
time delay of start-up(s)			3~8
Wave factor			≤0.2%
Load			100% rated output current

Battery Charger 400VAC to 220VDC 10A/20A/30A/40A